
4" submersible centrifugal multistage wet end with floating impellers for water supply.
Assembled on a motor, pumping of clean water for domestic, industrial, agricultural and gardening purposes. Suitable for boreholes in applications like water transfer, sprinkler or drip irrigation, domestic booster or booster sets. Joint kit wet end-motor according NEMA MG1-18.388 regulation.
Features ES4 02
Equipment
- Check valve: Included
Materials
- Diffuser/s: Technopolymer
- Discharge body: Stainless steel AISI 304
- Impeller/s: Technopolymer
- O-rings: NBR/EPDM
- Pump body: Stainless steel AISI 304
- Pump shaft: Stainless steel AISI 304
- Suction body: Stainless steel AISI 304
Manufacturing features
- Discharge connection type: Thread
- Discharge diameter: 1 1/4"
Limitations
- Maximum sand quantity in suspension (g/m3): 100
- Maximum submersion (m): 150
- Water temperature (ºC): Max: 40
Performance
Electrical data
Three-phase models | Motor power P2 | |
---|---|---|
50 Hz | [kW] | [HP] |
ES4 02 10
Width: 13 cm Height: 13 cm Depth : 36 cm Individual packaging weight: 3.500 Kg Individual packaging volume: 0.001 m³ Units per pallet in individual packaging : 1 Limitations
Electrical features
|
0,55 | 0,74 |
ES4 02 14
Width: 13 cm Height: 13 cm Depth : 43 cm Individual packaging weight: 4.100 Kg Individual packaging volume: 0.001 m³ Units per pallet in individual packaging : 1 Limitations
Electrical features
|
0,75 | 1,01 |
ES4 02 20
Width: 13 cm Height: 13 cm Depth : 53 cm Individual packaging weight: 5.100 Kg Individual packaging volume: 0.001 m³ Units per pallet in individual packaging : 1 Limitations
Electrical features
|
1,10 | 1,48 |
ES4 02 28
Width: 13 cm Height: 13 cm Depth : 71 cm Individual packaging weight: 6.300 Kg Individual packaging volume: 0.001 m³ Units per pallet in individual packaging : 1 Limitations
Electrical features
|
1,50 | 2,01 |