Hydropneumatic pressure unit consisting of three electric pumps, each controlled by the ESPA ESD variable frequency drive.

The pressure is read in real time to adapt the speed of the motors regulated by the ESPA ESD variable speed drives and to adjust the flow provided to the demand of the installation. This achieves greater comfort for the user, by ensuring a constant water supply pressure. The reduction of the motor frequency also leads to considerable energy savings, as well as reducing the noise level at the site where the equipment is installed.

The pumps are started in cascade and in alternation, thus guaranteeing a perfect distribution of the operating times of all the pumps and increasing the durability of the equipment.

The electric pumps of the device are attached to a frame that guarantees the stability and alignment of the system. A non-return valve and a stop valve are assembled on the delivery of each electric pump, with a link provided for easier removal and maintenance of the equipment.

The valves are connected to a common stainless-steel manifold. The equipment includes an 8-litre hydropneumatic accumulator and a connection box with thermal-magnetic protection for easy installation and connection of the electric circuits in the smallest space possible.

Series features CKE3

Equipment

  • Check valve: Yes
  • Manifold: Included
  • Support base: Included

Manufacturing characteristics

  • Discharge connection type: Flange
  • Impeller type: Closed
  • Motor cooling: Fan
  • No. pumps: 3
  • Suction connection type: Flange
  • Suction type: Selfprimming
  • Tank capacity (l): 8

Usage limits

  • Liquid temperature (ºC): Max: 40

Electrical characteristics

  • Electrical isolation: F Class
  • Motor type: Asynchronous
  • Protection rating: IP55
  • Regulation: Electronics
  • Reset: Automatic
  • Service factor: S1
  • Service type: Continuous

Materials

  • Discharge body: Cast GG0
  • Gaskets: NBR/EPDM
  • Impeller/s: Stainless steel AISI 304
  • Mechanical seal: Aluminium- Graphite/ Graphite- Steatite
  • Pump shaft: Stainless steel AISI 304
  • Support base material: Metallic Sheet Painted

Related products

Multi 25

Multi-stage, integral, centrifugal, vertical electric pumps for pressurising homes, irrigation systems and clean-water pumping applications that require a sturdy, compact pump.

Multi 35 N

Multi-stage, integral, centrifugal, vertical electric pumps for pressurising homes, irrigation systems and clean-water pumping applications that require a sturdy, compact pump.

Multi 55 N

Multi-stage, integral, centrifugal, vertical electric pumps for pressurising homes, irrigation systems and clean-water pumping applications that require a sturdy, compact pump.

Multi VE 94

Multi-stage, integral, centrifugal, vertical electric pumps with rigid shaft coupling, designed for pressurising homes, irrigation systems and clean-water pumping applications that require a sturdy, compact pump.

Multi VE 121

Multi-stage, integral, centrifugal, vertical electric pumps with rigid shaft coupling, designed for pressurising homes, irrigation systems and clean-water pumping applications that require a sturdy, compact pump.

CKE2

Hydropneumatic pressure unit consisting of two electric pumps, each controlled by the ESPA ESD variable frequency drive.

CKE4

Hydropneumatic pressure unit consisting of four electric pumps, each controlled by the ESPA ESD variable frequency drive.

CKE1

Hydropneumatic pressure equipment consisting of an electric pump, controlled by the ESD ESPA frequency inverter.

Multi VE 121N

Multi VS04

Centrifugal multistage pump in-line for water supply

Multi VS06

Centrifugal multistage pump In-Line for water supply

Multi VS10

Centrifugal multistage pump In-Line for water supply

Multi VS15

Centrifugal multistage pump In-Line for water supply

Multi VS25

Centrifugal multistage pump In-Line for water supply

1/14
+34 972 58 80 00